Commando ALA550 Manuale Utente Scaricare il pdf (Pagina 13)

1/2/02

ALA550 

Press the

button 3 times within 3 seconds: The siren chirp once again, the system is now in Noiseless

mode, On this mode trigger the zone 4 shock sensor the trigger timer will reduced from 30 seconds to 15

seconds. .

The noiseless feature is programmed to activate for one arming cycle only. The security system will return

to normal operation during the next arming cycle.

SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Press the

button on the transmitter twice within

3 seconds will arm the security system, by-pass the shock sensor and the optional sensor connected to 4

pin plug. The system will chirp one additional time to confirm the sensor bypass mode was activated. The

sensor bypass feature is programmed to activate for one arming cycle only. The security system will return

to normal operation during the next arming cycle.

ARMING WHILE DRIVING: (see Alarm Feature III

- 1 Programming)

Your system can be armed while ignition on! Simple press

button for 2 seconds while the vehicle is

running, or the ignition is on. The system will chirp once and then once more to indicate the ignition is on.

The system will not respond to any input except the door trigger, mean while the starter kill relay and

ignition disable relay will not be activated. The system will disarm automatically when the ignition is turned

off. The siren will chirp twice and the LED will stop flashing.

G. PASSIVE ARMING (See Feature “II - 2” Programming)

Active arming / disarming is controlling your security system via the remote transmitter. This security

system is equipped with an optional Passive Arming feature, which allows the security system to arm 30

seconds after the last door is closed. Operation is as follows.

1. Turn the ignition to the “OFF” position and exit the vehicle.

2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any

door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once the

vehicle all entrances are closed.

3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1]

time and the parking lights will flash [1] time.

PASSIVE DOOR LOCKING: (See Feature “II

2” Programming)

The vehicle’s door will automatically lock after passive arming cycle has been completed.

PASSIVE ARMING BY-PASS: While the system disarmed, press the

buttons twice, the security

will respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporarily

state for as long as you wish. To exit passive by-pass, press the

button and the system will

return to normal status.

H. ACTIVE DISARMING – UNLOCK & DISARM:

1. Press button on the transmitter.

2. The siren will chirp twice and parking light will flash twice to indicating that the security system is now

disarmed. The vehicle’s door will unlock and dome light will turn on for 30 seconds upon disarming when

interfaced with the security system.

TAMPER DISARMING: If alarm triggered, upon disarm the system, siren chirp 4 times, parking light flash

3 times.

PATHWAY ILLUMINATION (See Alarm Feature “II

- 5” Programming): This feature turns the parking

light “ON” for 30 seconds upon a unlock signal and for 10 seconds upon the lock signal.

TWO STEPS DOOR UNLOCK: This feature will independently unlock the drives door only when disarming

the security system. Pushing the

button on the transmitter a second time within 3 seconds will unlock

the entire vehicle.

AUTOMATIC RE-ARM (See Feature “

I - 2” Programming): If this feature is selected, the security system

will automatically re-arm itself 60 seconds after disarming with remote transmitter. Automatic rearm will

cancel if any door is opened before the 60 seconds timer has elapsed.

I. DISARMING WITHOUT A TRANSMITTER

OVERRIDE THE ALARM WITHOUT PASSWORD PIN CODE: (Factory Default Setting)

The Override function may be used if the remote transmitter is lost or inoperative.

1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm will sound.)

2. Within 10 seconds push and release the valet switch

1 2 ... 8 9 10 11 12 13 14 15 16

Commenti su questo manuale

Nessun commento

Commando ALA550 Manuale Utente Pagina 13

Commenti su questo manuale